Version 14.05.2010
ZL-MFD2
p
age
5
2.3.
Connecting the interface to the navigation unit
• Connect Video-out of the AV-source to the interface box
• Connect Audio-out of the AV-source to the cable harness
Cinch-connections:
YELLOW
=
VIDEO-input (FBAS-signal)
RED
=
AUDIO-input right-hand side
BLACK
=
AUDIO-input left-hand side
•Connect 18pin-AMP-connector of the cable harness to
the 18pin-AMP-female connector on the backside of the navigation
• Red wire
of the cable harness connect to +12V ACC
• Black wire
of the cable harness connect to ground
• Green wire
of the cable harness +12V= VIDEO ON
if connecting an AV-source:
NOT
connect the
green wire
if connecting a rear-view-camera:
Connect the
green wire
to reverse light (+12V of reverse light signal)
by using a relay
2.4.
Activation of the interface as a current AV-source
CD-version
Press
AUDIO
and select
„AV“
(possibly switch the AV-source to “A+V” before)
DVD-version
Press
CD
and select
„AUX“
