Version 21.12.2016
V5-NBT
P
age
9
Cut the CAN bus wires of the vehicle harness and connect them in series according to
the pin assignment (see below) with the CAN bus wires from the V5C-UNI01 harness.
Connect red wire with +12V (pin 15) and black wire with ground (pin 12).
Connect female 12pin AMP connector of the harness V5C-UNI01 to the
front site of the V5C-M637 interface box.
Connect the female Quadlock connector of the vehicle harness on the rear side of the
head unit.
Pin assignment:
Cable colour
Assignment
●
Red
+12V permanent input - Pin15
● Black
Ground - Pin 12
●
● Yellow/Black
CAN HIGH Pin 11 - to the vehicle side
●
● Blue/Black
CAN LOW Pin 9 - to the vehicle side
●
Yellow
CAN HIGH Pin 11 - to the head-unit side
●
Blue
CAN LOW Pin 9 - to the head-unit side
●
Green
+12V power output
●
Pink
+12V power output
●
White
Rear gear signal input (+12V)
1
2
3
Quadlock
4
