Version 01.12.2015
V5-CCC
P
age
7
3.
Installation
Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent
12V source. If according to factory rules disconnecting the battery is to be avoided, it is
usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show
success, disconnect the battery with a resistor lead.
If power source is not taken directly from the battery, the connection has to be checked
for being start-up proven and permanent.
Prior to wire and device installation we suggest to connect and test correct function of all
after-market and factory infotainment equipment!
The interface is installed on the backside of the head unit.
3.1.
Connecting interface-box and harnesses
CAN-LOW (2)
Interface-box
V5C-M631
FRONT
Quadlock female
vehicle harness
Ground
+12V
CAN-HI (2)
V5C-UNI01
harness
CAN-HI (1)
CAN-LOW (1)
1
2
3
4
Quadlock male on
rear side of the
Head Unit
Cut off the 8 pin Molex connector from V5C-UNI01
harness (is not needed).
