Version 25.01.2012
USB-E65
Pa
ge
11
2.4.5.
Factory nightvision, factory DVD-changer, factory rear-view camera
On vehicles with factory nightvision, factory DVD-changer or factory rear-view camera, pin
out the video-signal and video-signal ground from the green 18pin AMP connector of the
vehicles harness (rear of navigation computer) and connect them by male RCA-connector to
the R-CAM IN of USB-box.
Navi
Video-signal
Video-signal ground
E65
Pin 3
Pin 11
The factory component will work as before.
3.
Operation
3.1.
Activation of the video-in-motion function
Tthe video-in-motion function is permanently active without disturbing the navigation
performance.
3.2.
Selecting the usbLOGiC as current AV-source
In the vehicle’s main menu, select
Infotainment
and then
TV
by iDrive to choose the
usbLOGiC as current AV-source.
3.3.
Assigning device control for connected AV-source
After selecting the usbLOGiC as current AV
source, push iDrive knob to open the
usbLOGiC control menu. Select control
levels setup “AV: RCxx” and assign related
IR-code as described in device control
table.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), the
menu items “AV” and “AV: RCxx” will not be available.
