Version 31.08.2011
USB-MFD2
Pa
ge
3
Dip switches
of USB-box
Dip switches
of USB-box
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the CAN-box TV-400
1.4.
Setting the dip switches of the USB-box USBC-M500
The default dip switch settings of the USB-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located
inside
the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.4.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input on engaged
reverse gear,
set dip2 = ON (up).
1.4.2.
Deactivating usbLOGiC AV-input
If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
Requirements
Vehicle
Volkswagen and Skoda
Navigation
MFD2/RNS2 or Nexus navigation
Limitations
Factory-TV-tuner
Must NOT be installed.
USB-port
Only for media which work with power supply by ONE single USB
connector.
All vehicles
dip 1 ON, dip 2 OFF, dip 3 OFF
