Version 31.08.2011
USB-C20
Pa
ge
3
Dip switches
of USB-box
Dip switches
of USB-box
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the USB-box USBC-M500
The default dip switch settings of the USB-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located
inside
the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.3.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input on engaged
reverse gear,
set dip2 = ON (up).
Note:
With after-market cameras, automatic switching works only from
usbLOGiC mode.
1.3.2.
Deactivating usbLOGiC AV-input
If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
Requirements
Vehicle
Mercedes Benz C-Class (W203) til 04/2004, CL-Class (C215) from
09/2002 til 09/2003, CLK-Class (C208 W208) all years, CLK-Class
(C209 W209) til 05/2004 , E-Class (W210) all years , G-Modell
(W463) til 03/2007, ML-Class (W163) all jears, S-Class (W220)
from 09/2002 til 09/2003, SL-Class (R230) til 06/2004
Navigation
Comand 2.0, Comand APS CD
Limitations
Factory-TV-tuner
Must NOT be installed.
After-market rear-view cam
Automatic switching to camera only works from usbLOGiC mode
USB-port
Only for media which work with power supply by ONE single USB
connector.
