Version 28.11.2012
TF-MMI
P
age
2
1.2.
Check compatibility of vehicle and accessories
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
1. Remove the factory CD-changer out of the glove
box. You have to remove the navigation-computer,
if there is no cd-changer in the vehicle.
2. The interface has to be plugged into the fibre-optical ring.
The direction arrows have to be obeyed when connection
the fibre-optical cables.
3
The plug and play power connector should be installed
between the power connector of the factory CD-changer.
If used in vehicles without factory CD-changer cut off the plug and
play power connectors and connect
red
to
+12V permanent
current
and
black
to
ground
.
Requirements
Vehicle
A1, A5 (B8), A6 (4F), A6 (4FH allroad), A7 (4G), A8 (4E/4H), Q5,
Q7 (4L),
VW Touareg 2010
Navigation
Audi MMI 2G/3G/3G+ and VW RNS850
Audi CD changer
Radio Module
Audi CD changer
female 8pin connector
