Version 01.03.2019
RL-FD79-TF
Pag
e
7
4.
Activation of the video-in-motion function
The video-in-motion can be activated and deactivated by Dip 1 on both RLC-FO01-A modules
or alternatively by steering wheel buttons or over the loose green cables in connection with
a switch (not included in delivery).
Option 1: Video-in-motion permanent
With dip1 to ON on both RLC-FO01-A modules the video-in-motion function is activated
permanently. The navigation cannot be used.
Option 2: Video-in-motion selective (recommended for the use of navigation)
There are some vehicles that will allow you to activate the Video In-Motion through the
steering wheel controls (set on both RLC-FO01-A modules dip1 to OFF):
Option 3: Video-in-motion selective (recommended for the use of navigation)
With dip1 to OFF on both RLC-FO01-A modules the included green cables are used to
activate the video-in-motion function.
Connect a switch to the green cables and connect the green cables to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
TYPE 1 - Seen on Ford Edge and C-Max.
Hold the BACK button (Left Arrow) for 3
seconds to activate the Video In-Motion.
To deactivate - Repeat the step above.
TYPE 2 - Seen on Ford F-Series vehicles.
Hold the PHONE button (OK) for 4
seconds to activate the Video In-Motion.
To deactivate - Repeat the step above.
