Version 25.09.2017
DT3-CXC-TV1
Pag
e
4
1.3.1.
Automatic switching to after-market rear-view camera
If an after-market rear-view camera shall be connected or a factory
rear-view camera is connected, in order for the dvbLOGiC to
automatically switch to its camera input when reverse is engaged,
set dip2 = ON (up).
Note:
Automatic switching to after-market rear-view camera works
only from dvbLOGiC mode.
1.3.2.
Deactivating dvbLOGiC AV input
If no peripheral AV-source shall be connected to the dvbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the dvbLOGiC,
set dip1 = OFF (down).
2.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Complete and correct function of the interface is possible only when CAN
and
MOST®
(tuner) connections are made properly. On vehicles without TV-icon, it will be coded
automatically after installation.
Place of installation is behind the navigation computer CCC or CIC.
Note
: The loose white and green cable of harness TV-BM01 are not required and must be
isolated.
Dip switches
of tuner-box
Dip switches
of tuner-box
