Version 30.09.2014
CI-TF-NTG2
Pa
ge
3
1.3.
Setting the Dip-switches of the Can-Box TV-500
Vehicle/ navigation
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
Vehicles with NTG2/NTG4-xxx*
ON
OFF
OFF
OFF
OFF
OFF
Vehicles with NTG2.5
OFF
OFF
OFF
OFF
OFF
OFF
* With dip1 to OFF on vehicles with NTG2/NTG4-xxx the included green cable is used to
activate the video-in-motion function.
Note
: Dip switch functions of the TV-500
Dip 1 – activation TV-free
Dip 2 – no function
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
1.3.1.
Exception: Vehicles with Comand Online NTG4.5
On some vehicles with Comand Online NTG4.5 the navigation performance is affected as
long as the video-in-motion function is activated. This can only be detected by a test drive
with built-in TV-free with Dip 1 to ON!
If the navigation performance is affected you have to set Dip 1 to OFF. As long as the video-
in-motion function is activated, the navigation will NOT be working! You can activate and
deactivate the video-in-motion function by pressing a button (see chaper “Activation of the
video-in-motion function”).
Vehicle/ navigation
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
NTG4.5 with TV-free pemanent
ON
OFF
OFF
OFF
OFF
OFF
NTG4.5 with TV-free selective
(hang-up button)
OFF
OFF
OFF
OFF
OFF
OFF
Note:
It is possible to install the TV-free on vehicles with Comand Online NTG4.5 with
selective activation generally.