Version 24.02.2012
C2-RNSE
Pa
ge
10
4.3.
Switching between AV1 and AV2
After selecting the c.LOGiC as current AV source,
longpress the
knob
to switch between AV1 and AV2.
Note:
If AV2 is deactivated (see chapter chapter Deactivating
c.LOGiC AV2 input), it is not possible to switch to the c.LOGiC’s
AV2.
4.4.
Assigning device controls
After selecting the c.LOGiC as current AV source, switch to the c.LOGiC’s AV1. Now longpress
key
SETUP
. The FIS will display “TV 1” and “RC01”. Turn right knob until the device-related
IR-code as described in device control table for AV1 (appendix A) is reached. Push right knob
to confirm the assignment. Longpress right knob to assign device control for AV2. The FIS will
display “TV 2” and “RC01”. Turn right knob until the device-related IR-code as described in
device control table for AV2 (appendix A) is reached. Push right knob to confirm the
assignment.
Note:
The IR-control channel TV1 is preset to RC-Code 41 compatible DVB-T tuners and TV2
is preset to RC-Code 09 for the usbLiNK.
If the AV2 is deactivated (see chapter chapter Deactivating c.LOGiC AV2 input), it is not
necessary, nor possible to assign device controls.
4.5.
Remote function
The button assignment table shows which functions of the connected devices can be
executed by head-unit buttons. Once an AV-input is activated, the head-unit button in the
left column will execute the function described in the corresponding device column. The
function description equals the remote control buttons of the optional c.LOGiC remote
control or the additional device. On the additional device the writing may vary (e.g. AV
instead of Source).
