Version 08.12.2015
Side
5
Install the microphone close to the driver. Connect the microphones 3.5 mm jack to the
3.5mm jack bush of the blueLOGiC® harness.
2.3.
Activation of the Interface
After first installation the vehicle must go into sleep-mode in order to recognize the newly
attached hardware. After re-connecting the battery, lock the vehicle and wait for 5 -10
minutes.
3.
Interface operation
The interface enables the telephone bus of the factory navigation system. Therefore in
principal, the operation is analogue as described in the manual of the navigation system.
3.1.
Pairing the blueLOGiC® interface with a mobile phone
Up to 5 mobile phones can simultaneously be paired with the blueLOGiC® interface. If a sixth
phone is paired, the oldest entry is automatically deleted. In some cases, it becomes
necessary to put the vehicle in sleep mode to enable correct function of the 6
th
phone.
For pairing, enable the pairing mode of the mobile phone (see manual of the mobile phone).
Search with the mobile phone for „
blueLOGiC
“ and connect with activation code „
1234
“.
If a mobile phone had been paired to the blueLOGiC® interface (requirement is an occurred
pairing with a mobile phone, see above), a connection will be automatically established as
soon as the mobile phone is in reach. If multiple paired mobile phones are simultaneously in
reach, the blueLOGiC® interface will be connected to the first phone.
