Carat Dustcatch Pro DPSK180000, Instruction Manual

Page: 13 / 40

GRINDING
CORNER GRINDING
1. Turn on the Vacuum.
2. Securely hold the Handle of the grinder.
3. Turn on the angle grinder.
4.
Place the [a] Main Body on the material and slowly
move over the surface to be ground. (Fig.15)
Fig.15
[CAUTION]
Don't grind over the edge of the material as some
dust could escape. (Fig.16) Fig.16
N G
1. Make sure that the angle grinder
and Vacuum are turned off.
2. Lift the angle grinder away from the material.
3. Open the Front Lid by pulling the Slider.
(Fig.17)
[CAUTION]
The wheel dia. must be max.180mm to
prevent the over grinding. (Fig.18)
(90mm)
max.180mm
Fig.18
Fig.17
Slider
Fig.19 Fig.20
4. Turn on the Vacuum.
5. Turn on the angle grinder while ensuring the handle is gripped firmly .
6. Place [a] Main Body on the material and slowly move toward the grinding
direction along the wall. (Fig.19)
7. Turn off the angle grinder and vacuum, then close the Front Lid. (Fig.20)
Front
Lid
Vacuum
Vacuum
-13-
22-5-2019
Hoofdkantoor in Nederland
Carat Nederland B.V.
Nikkelstraat 18, 4823 AB Breda
Kees van Beek
Managing Director