9
11.
Loosen the screws
12.
Take (d) the small part of the M-adapter off.
13.
Loosen the flat HD screws with the supplied wrench.
14.
Take (d) the large part of the M-adapter off.
15.
De-assemble the replacing B- or H-adapter
16.
Mount the large part of the B- or H-adapter.
17.
Tighten the flat HD screws with the wrench (do not
forget to mount the cup washers!).
18.
Mount the small part of the B- or H-adapter.
19.
Tighten the 2 screws to assemble the small and large
part of the adapter (do not forget to mount the
spring washers!).
5. MAKE IT FIT TO THE ANGLE GRINDER
4.
Hold 3 points of the connector and tighten the
screws firmly.
WARNING:
Make sure the collector is securely attached,
otherwise it could loosen and cause injuries.
