1
ASSEMBLY INSTRUCTIONS FOR SWE LED LIGHTING SYSTEM
1. JOINING THE SWE PROFLES
1.
Carefully take out the SWE profiles form the box and place them on a stable surface.
2.
Prepare the mounting slings for the installation (min. 2 slings per fixture).
3.
Unscrew and remove the SWE covering shield from the side where the profiles will be joined together [pic. 1]
4.
Remove the top cover [pic. 2]
5.
Place both SWE profiles so the
A
profile will be aligned to the
B
(
A
opposite
B
) [pic. 3]
6.
Place the mounting hooks in SWE profile guides [pic. 4]
7.
Hang the fixture at designated places by means of wires, lines or chains
8.
Connect both of the connectors together (
A
profile connector to
B
profile socket) [pic. 5, pic. 6]
pic. 1
PIN
CLAMP
pic. 2
pic. 3
A
B
pic. 4
PROFILE
GUIDE
pic. 5
A
B
pic. 6
