“M” - Displays more detailed and more precise results of
measurement.
“P” - Display the result table of user calibration.
Units of measurement
For convenience of the end users from various countries, the
device is able to display the measurement results in few units.
To choose the units, press “UNIT” button once. This will switch
the displayed units and the current choice will be shown in the
bottom left corner of the screen. “mm”, “mil”, “
μm
” units are
available.
Measurement
Turn on the device and wait until auto-calibration is completed
(2-3 seconds). Once done, the will be “----” displayed on the
screen. Select required measurement mode and display units.
Firmly place the device so that the probe flat against the
measured surface. Do not move the device.
Once the measurement is done, you will be notified by a sound
and the device will display the result of the measurement.
Accuracy of the measurement depends on firm and flat contact
between the probe of the device and the surface.
