background image

© 2011 www.car-solutions.com                                                                                                          support@сarsolutions.com.ua 

 

 
 
 
 
 

Multimedia Video Interface for Mercedes-Benz 

Equipped with Command NET 2.5 with SD slot 

 
 
 
 

Compatible car models: 

 

Mercedes-Benz A-Class (2009 manufacture year) 

 

Mercedes-Benz B-Class (2009 manufacture year) 

 

Mercedes-Benz CLC-Class (2009 manufacture year) 

 

Mercedes-Benz CLS-Class (2009 manufacture year) 

 

Mercedes-Benz CLK-Class (2009 manufacture year) 

 

Mercedes-Benz G-Class (2009 manufacture year) 

 

Mercedes-Benz GL-Class (2009 manufacture year) 

 

Mercedes-Benz GLK-Class (2009 manufacture year) 

 

Mercedes-Benz ML-Class (2009 manufacture year) 

 

Mercedes-Benz R-Class (2009 manufacture year) 

 

Mercedes-Benz SL-Class (2009 manufacture year) 

 

Mercedes-Benz SLK-Class (2009 manufacture year) 

 

Mercedes-Benz SLR-Class (2009 manufacture year) 

 

Mercedes-Benz V-Class (2009 manufacture year)

 

 
 
 
 

This car video interface is fully compatible with monitors of the above-mentioned cars. After interface 

connection all original functions of the head unit are preserved. Switching between RGB, AV1, AV2 video 
sources  and  original  image  is  performed  via  original 

NAVI

  button.  Blue  wire  for  rear  view  camera  signal 

must  be  connected  in  case  of  OEM  rear  view  camera  or  if  you  need  to  connect  aftermarket  rear  view 
camera! 

 
 
 
 

 

Note:

 

All above-mentioned monitors do not have touch screens. That is why you can purchase 

6.5-inch touch screen panel (this size is for reference only, please refer to the size of your car monitor) and 
also USB touch screen controller for more comfortable usage of navigation box (e.g. CS9100).

 

 
 

Summary of Contents for Video Interface











Reviews: