2.4 Parking guide line setting
FACTORY mode – Press
◀
◀
◀
◀
button more than 2sec. on the remote control.
PARK
* PARK ENABLE : Selecting whether to
display the parking guide line or not on
rear gear (default : OFF)
* PARK SETUP : Adjusting the position of
the parking guide line (available in PARK
SETUP -> V-POSITION, H-POSITION)
PARK - ENABLE
A. If you set ‘PARK ENABLE’ as
“ON” state, there will be the rear
view parking guide line.
(as shown left picture)
B. Press the OK button of remote
controller, ‘’H_POS’’ will be shown
on the right and control moving
PARK - ENABLE
A. Press the OK button of remote
controller one more, ‘’V_POS’’ will
be shown on the right and control
moving in vertical direction.
www.car-solutions.com
11
SETUP -> V-POSITION, H-POSITION)
* SAFE ENABLE : In case of Connecting
“Safe” wire from the power cable to the
hand break,
ENABLE – OEM Picture displays in Drive
gear position
DISABLE – No display locked in any gear
position
on the right and control moving
in horizontal direction.
