2.9.1 Remote Controller Button
www.car-solutions.com
16
①
First of all, press
◀
button on remote controller for 2
seconds. Enter FACTORY mode, then select IR
MEMORY in UTIL section.
There are two options in IR MEMORY as shown above;
DMB and DVD.
Select one of these AV sources.
②
This is a window where DVD remote controller button
values are programmed. Just select a menu you want to
save.
(Select “DMB in options of IR MEMORY” if you want to
save values of DMB’ s remote controller. And follow the
instruction below.)
Programming Instructions
>
a
. Select “POWER” in OSD menu, then press “OK” on
remote controller. (as shown above)
b
. If the marked area flickers as shown above, press
“POWER” button on the remote controller of DVD that you
want to use. (
continued on the next page
)
Programming OSD buttons value using remote controller supplied together with DVD,TV,DVB-T.
If you want to control DVD and DMB models other than SANYO and NECVOX via touch screen (using OSD menu, you can
program value of DVD and DMB’ s remote controller which you have. Then you can control DVD and DMB via touch screen.
>>>
Car
Solutions
