-FAQ
1. When can not change mode.
-. Check if the Ground (IR) cable is connected or not.
- Check if LED lamp is turned on or not If it is not turned on Check if power cable is connected or not
FAQ
-. Check if LED lamp is turned on or not. If it is not turned on, Check if power cable is connected or not.
-. Check if CAN cables are connected well.
2. When the screen is displaying only black color.
-. Check if 2nd LED is turned on or not. If it is not turned on, please check all video sources that you
ill
t ith th i t f
i
ti
ll
t
will connect with the interface is operating well or not.
-. Check if interface is connected well.
3. When displayed color of screen is not proper. (If it’s too dark or the color is not proper)
-. Try to select “Initial” on OSD menu, If the color of screen keeps on displaying wrong color, you have
y
p
p y g
g
y
to ask manufacturer for the problem.
-. Try to adjust Color, Contrast, Brightness by the remote.
4. When Back-up camera is not displayed on the screen.
- Put Dip S/W no 7 down
. Put Dip S/W no.7 down.
5. When the mode you set is not skip.
-. Check if Dip S/W is set properly.
6 Wh
M i
th
i
t di l
d
6. When Main screen on the car is not displayed.
-. Check if In/Out cables are connected well. If it keeps showing the same problem, you have to ask
manufacturer for the problem.
7. When the screen is displaying only white color.
y g
y
-. Check if out cable is connected well. If it keeps showing the same problem, you have to ask
manufacturer for the problem.
-24-
car-solutions.com
car-solutions.com
