Car Show Installation Guide
Car Show
Copyright 2012 All Rights Reserved
Installation Guide
Page 6
CAUTION
Mount Car Show Navigation into Dash
Be sure to fully engage all connectors
Insert Car Show Navigation System Into Dash and mount
using OEM 4 x 10mm (2 Left/2 Right) screws
Re-install upper vent assembly and be sure to connect all
harnesses
Re-Install Lower Trim Components
Carefully re-install lower dash components
Verify Unit Operation
Power on unit to verify full operation
Insert a DVD to confirm the Video Disable
Circuit is properly Operating.
The Brake Wire must be connected to the Park Brake
Indicator Wire to complete a ground when the brake is
engaged.
ENABLE INSTALLER SETTINGS
You will need to select certain Installer Setting based on any Optional Equipment that you may have
installed
STEP
5
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these steps
to display the Installer Setting Screen, select:
1) From any Screen, select “Menu”
2) From the Menu Screen, select “Settings”
3) Press “Keypad,” Press “7253” and “Enter”
