9
INSTALLATION
Rubber Caps
Mounting Bolts (M3.5x10)
Mounting Bracket
Levers
DVD Bracket
Slots
1. Determine the mounting location and secure bracket. (See Notes Below)
2. Attach the mounting bracket with the included screws. (See Notes Below)
3. Insert the two levers of the mounting bracket into the slots on the DVD pod to fix the
display unit when using this installation method. (See Notes Below)
4. Open the monitor to display the five screw holes.
5. Attach the unit to the bracket with the supplied mounting bolts.
6. Insert five rubber caps to hide the screw holes.
7. When the installation has completed, you can also move the display upward or
downward, left or right to adjust the viewing angle.
Tapping Screw (ø4x10)
NOTE: We have included additional hardware to provide maximum
installation flexibility and the ability to separate the bracket from the
overhead pod. This will allow you to fasten the mounting bracket
firmly to the vehicles structural roof beam for a more rigid installation.
