Version 21.06.2017
CI-VL3-MIB-4
P
a
g
e
11
2.4.2.
Audio-insertion
This interface is only able to insert video signals into the factory infotainment. If an AV-
source is connected, audio insertion must be done by factory audio AUX input or FM-
modulator. The inserted video-signal can be activated simultaneously to each audio-mode of
the factory infotainment.
2.4.2.1.
Connection of 2 Audio sources
If two AV-sources shall be connected, the optionally available audio switch SW-A2X1 is
needed. When switching the video interface from video-IN1 to video-IN2, the audio will also
automatically be switched by the SW-A2X1.
Connect the
pink
cable (Audio switch - power) of the 20pin connection cable to BATT
of the external Audio switch SW-A2X1.
Connect the
black
cable (Audio switch - ground) oft he 20pin connection cable tot he
grey
cable of the external Audio switch SW-A2X1.
