Car-Interface v.LiNK CI-VL2-N902 Manual Download

Page: 18 / 21

Version 23.02.2021

HW: 25(V92)/(V51)

CI-VL2-N902

Interface operation

3.1.

By infotainment buttons

To switch the video sources the vehicle’s

HOME

button at the steering wheel button can be

used.

A double press of the steering wheels “Home” key switches to the next activated video
input.

If all inputs are enabled the order is:

Factory video



video IN1



video IN2



factory video



…

Disabled inputs will be skipped. While switching from

Video IN1

Video IN2

the audio-

source will be switched too, assuming the sources have also been connected to the audio
cable.

Switchover by vehicle buttons isn’t possible in all vehicles. In some vehicles the external
keypad has to be used

(see following chapter).

3.2.

By external keypad

Alternatively or additionally to the factory infotainment buttons, the interface’s external
keypad can be used to switch the enabled inputs.

Summary of Contents for v.LiNK CI-VL2-N902






















Search results

Summary of Contents for v.LiNK CI-VL2-N902

Reviews:

Related manuals for v.LiNK CI-VL2-N902

Brands by name

Popular brands

Car-Interface v.LiNK CI-VL2-N902, Manual

Search results

Summary of Contents for v.LiNK CI-VL2-N902

Reviews:

Related manuals for v.LiNK CI-VL2-N902

Brands by name

Popular brands