Version 09.08.2021
HW (V31)
CI-RL5-MIB-STD2
P
a
g
e
7
2.3.
Installation - ribbon cables into the monitor panel
Remove the head-unit, disconnect and remove the DVD drive unit and further disconnect
and remove the frontpanel, which is fixed to the head-unit housing by 6 Torx screws (T9).
Replace the original front panel-retaining plate, which is fixed by 9 Torx screws,
against the enclosed exchange metal frame.
Disconnect the golden coloured 60pin ribbon cable at the front panel mainboard
60pin ribbon cable base and connect it to the 60pin ribbon cable base at the
daughter PCB’s bottom side (heed the following warning notes!).
Connect the daughter PCB’s pre-assembeled 60pin ribbon cable to the previously
become free 60pin ribbon cable base of the mainboard. (heed the following warning
notes!).