Version 03.05.2021
HW: BOT(V40)(V54)
CI-RL4-NAC12
P
a
g
e
14
2.3.3.
Analogue power supply for the video interface
Connect the female 20pin connector of the 20pin interface cable to the male 20pin
connector of the video interface.
Connect the 20pin interface cable’s white wire “
Manual ACC”
to +12V
ACC
or to +12V
S-
contact
terminal 86s +12V
(e.g. glove compartment illumination).
Note:
In case the analogue connection has to be made (because some vehicles are not
compatible), the input signal for each connected video source must also be manually
triggered via the corresponding 4 trigger lines
Trig-REAR
/
Trig-FRONT
/
Trig-RIGHT
/
Trig-LEFT
For analogue connection, dont forget to set dip4 to OFF!