Version 29.01.2021
HW: CAM(V100)/(V21)
CI-RL4-MZD88
P
a
g
e
5
1.3.
Connection - Video-Interface
The video-interface converts the connected after-market sources video signals into an RGB
digital signal which is inserted in the factory monitor using separate trigger options and it
reads vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video
interface.
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the 8 dip-switches at the
video-interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
*
The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear.
The camera power 12V will automatically be provided by the green wire
"Reverse-Out"
when the reverse gear is engaged, plus 10 seconds delay for the front camera, and also +12V
when the front camera is manually selected by external keypad (see chapter "Power Supply
Output").
Dip
Function
ON (down)
OFF (up)
1
Front camera
enabled*
disabled
Power supply
output
(red wire)
+12V (max. 3A) when reverse gear
is engaged incl. 10 seconds delay
and +12V by manual switching to
front camera by keypad
+12V (max. 3A) ACC
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
Set to OFF
5
Rear-view cam type
after-market
factory or none
6
Guide lines
disabled
enabled
7
No function
Set to OFF
8
