Version 10.08.2020
HW:CAM(V98)/(V31/ZK)
CI-RL4-LR17
P
a
g
e
7
1.5.
Settings of the 4 Dip switches (CAN functions – red)
All 4 dip-switches of the video interface have no function for normal use
and have to be set to OFF.
Dip position “down” is ON and position up is OFF.
Navigation / system
Dip 1
Dip 2
Dip 3
Dip 4
Range Rover,
Range Rover Sport,
Discovery 5,
Range Rover Velar,
New Jaguar XE
ON
OFF
OFF
OFF
Jaguar XF protocol
OFF
ON
OFF
OFF
Jaguar XE 2016 protocol
OFF
OFF
OFF
OFF
If the CAN communication doesn’t succeed with the mentioned CAN positions, the other
CAN protocol can also be tried.
After each Dip-switch-change a power-reset of the video interface has to be performed!
2.
Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The video interface is supposed to be installed at a suitable location behind the factory
monitor. This requires the vehicle’s centre console to be removed.
