Version 30.10.2020
HW:BSV-LVDS(V97)/(V45)
CI-RL3-SC15
P
a
g
e
9
2.4.
Connection – 10pin Power / CAN cable
Connect the 10pin power / CAN cable’s female 10pin connector
to the 10pin connector of the video interface.
Connect the single
grey wire
of the 10pin power / CAN cable
to the vehicle’s CAN-Low.
Connect the
blue wire
of the 10pin Power / CAN Cable
to the vehicle’s CAN-High.
Note: To handle the CAN+ and the CAN- connection, the enclosed
20pin OBD connector can alternatively be used,but a
perfect connection from behind without that connector
will avoid loose problems and dysfunction.
Connect the single
brown wire
of the 10pin Power / CAN Cable to vehicle’s negative
ground.
Connect the single
red wire
of the 10pin power/CAN cable to +12V ACC power supply.
Note:
The CAN communication doesn’t succeed in all vehicles. If, after connecting the 10pin
Power / CAN cable, no interface LED lightens up while the ignition is turned on, refer to
chapter “Analogue power supply for the video interface”.
