Version 31.01.2019
HW:CAM-GD (V94)
CI-RL3-NAC
P
a
g
e
12
2.3.2.
Connection to the head unit – Power / CAN
Disconnect the female PSA Quadlock connector at the
rearside of the head unit and click out the green female
22pin connector of the female PSA Quadlock connector.
Connect the singel four cables of the POWER / CAN cable
to the green female PSA Quadlock connector as shown:
„ACC / S-Contact“
to the first thick
green
(
or
pink
) cable
„GND“
to the second thick
green
/yellow cable
„CAN-HIGH
“
to the
yellow
(or white) cable beside Ground
„CAN-LOW“
to the
grey
(or
pink
) cable below
Connect the power / CAN cable’s female 10pin connector to the 10pin connector of the
video interface.
(NOT requested for Opel Navi 5.0 IntelliLink)
Connect the interface cable’s female 12pin connector to the 12pin connector of the interface.
Connect the single red colored cable
“ACC-OUT”
and the singlepurple colored cable
„Manual ACC“
of the video interface cable to stabile
+12V
S-contact
terminal 86s
(e.g. glove compartment illumination).
(Opel Navi 5.0 IntelliLink)
Note:
Don’t forget to once activate the vehicle’s sleep mode after all connections are done,
otherwise there will be no communication with the vehicle’s CAN-bus!
