Version 30.01.2020
HW:
GD(V97)/(V33)
CI-RL3-MIB-TT
P
a
g
e
11
2.6.
Connecting video sources
It is possible to connect an after-market rear-view camera and two more AV sources to the
video-interface.
Before a final installation of the video sources, we recommend a test-run to ensure the
compatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there’s always a possibility of incompatibility.
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video-interface.
Connect the video RCA of the AV source 1 and 2 to the female RCA connector
“Video IN1”
and
”Video IN 2”
of the 12pin interface cable.
Connect the video RCA of the Rear-view camera to the female RCA connector
“Camera IN”
of the 20pin interface cable (refer also to chapter “Video signal connection of the rear-view
camera”)
