Version 27.07.2021
HW CAM(V31)/(V71)
CI-RL2-NBT
P
a
g
e
9
2.3.
Connecting video-interface and CAN-box
The CAN-bus box reads digital signals from the CAN-bus and converts them for the video-
interface. ACC +12V max. 0.5A (red of 6pin) and reverse gear +12V max. 0.5A (green of 6pin)
constant signal. Video-source switching (white of 6pin) as +12V impulse.
Connect black female 4pin Micro-Fit connector of the 4pin cable to the male 4pin
Micro-Fit connector of the CAN-box.
Note:
Check LEDs on CAN-box after reconnecting the battery, one must be on.
Pin-assignment quadlock connector NBT
No liability for vehicle wire colors and pin definition!
Possible changes by the vehicle manufacturer. The given
information must be verified by the installer.
Cable colour
Assignment
●
●
Brown/Red
+12V permanent 15
●
Brown
Ground Pin 12
● Black
CAN HIGH Pin 11
●
Yellow
CAN LOW Pin 9
