Version 20.09.2017
CI-C2-MK-AUX
P
age
10
Using the respective STA-xxx IR-control cable, interconnect the blue (yellow) female
3pin AMP connector of harness C3C-BM700 and the IR-port of the AV-source 1 (AV-
source 2).
Using an RCA-cable, interconnect the female RCA-port AV1 (AV2) of the interface-box
C2C-M700 with the AV-output of the AV-source 1 (AV-source 2).
The pink ACC-output wire (+12V max. 1A) of harness C3C-BMW0x can be connected
to the ACC-input wires of the connected devices to switch it on. It c12V when
the navigation computer is running.
3.4.2.
Installing AV-source’s IR-sensor additionally
Additionally to the control via OEM navigation, it is possible to install the original IR-sensor
of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for
the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be
connected and used simultaneously. Installation of the IR-sensor is recommended as the
controls via navigation are limited, and not all functions may be covered.
3.4.3.
After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to the female RCA
connector R-CAM IN of interface-box C2C-M700.
Connect the green wire of C3C-BM700 to the camera power supply (+12V max. 1A)
The green wire is high (+12V) when reverse gear is engaged.
Note:
Compatible with NTSC cameras only.
