6.
7.
Using the Selector Dial
The selector dial (F) will control the speed of the disk in the pitcher while the
frothing or heating disk will control the milk texture of the frothed or heated
milk. There is no right or wrong way to use the frothing or heating disks
combined with the different settings on the selector dial. The below
chart is a helpful guide, but individual results will vary depending on the
type of milk used and different ingredients that are added during the
frothing cycle. It is highly recommended to experiment with the different
setting and disk combinations, to create your own delicious recipes.
A
B
C
D
E
F
Frothing Disk
Heating Disk
(Cold) Froth
(Hot) Froth
(Hot) Flat
(Hot) Choc
Cold milk with
thick, velvety
froth
Heated milk
with maximum
froth, perfect
for cappuccino
Heated milk
with some
froth, perfect
for flat white
Use heating disk
for best results
Use the frothing
disk for best
results
Heated milk, no
froth, perfect
for lattes and
steamers
Heated milk, no
froth, perfect
for lattes and
steamers
Heated milk, no
froth, perfect for
hot chocolates
Hot Frothing and Heating Milk
Perfect for hot beverages such as cappuccinos, lattes, hot chocolate,
flat whites and milk steamers.
1. Plug in appliance.
2. Remove lid from milk pitcher. (A)
3. Place one of the frothing disks or the heating disk into the bottom of the
milk pitcher. Ensure the disk is completely snapped in. (B)
4. Make sure underside of the milk pitcher is dry.
5. Pour fresh cold milk into the milk pitcher (C) and replace lid. (D)
6. Place pitcher on heating platform. (E)
7. For frothing and heating milk turn the selector dial (F) to the (HOT) FROTH
or FLAT icon. When the (HOT) FROTH icon is selected the disk will rotate
at a high rate of speed. When the FLAT icon is used the disk will spin at
a medium rate of speed. Depending on which disk is used, this will help
control the final texture of the milk once the cycle is complete. Selecting
the frothing disk with the (HOT) FROTH setting will maximize the froth
produced while selecting the heating disk with the FLAT option will give
almost no froth but will heat/steam the milk.
8. Press the center of the selector dial and the frothing/heating action starts
automatically. The dial will illuminate blue and a short beep will indicate
that the cycle has begun.
9. When the milk has reached the maximum temperature, the appliance
will automatically shut off. The indicator light turns off and the frothing
action stops. A short beep will indicate that the end of the cycle has been
reached. The cycle can always be stopped manually by pressing the
center of the selector dial or lifting the pitcher from the base.
CAUTION: The milk pitcher is now very warm; the bottom of the pitcher
is hot. Only place the milk pitcher on a heat resistant surface.
10. Pour the warm milk into your cup and spoon the froth on top.
11. Always unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before cleaning
the appliance.
Cold Frothing and Mixing Milk
Good for cold beverages such as iced cappuccinos, iced fruit lattes, cold
malts and mixing chocolate milk. Follow steps 1 through 6 above in “Hot
Frothing and Heating Milk.”
Note: For the best cold frothing or cold mixing results, it is recommended
to use the frothing disk.
1. For cold frothing or cold mixing (incorporating chocolate syrup into milk,
mixing malt powder, etc.) turn the selector dial (F) to the (COLD) FROTH
setting.
2. Press the center of the selector dial and the frothing/mixing action starts
automatically. The dial will illuminate blue and a short beep will indicate
that the cycle has begun.
3. Once the frothing disk starts spinning, you may add any ingredients like
chocolate syrup, malt powder, etc.
