11. Turning OFF the EC Select
• After making the last coffee wait for approx. 15 seconds so that the thermoblock
can release any steam and rest-water into the tray. This is perfectly normal.
• Now switch the ON/OFF switch to the off position to turn off the machine. The
red indicator light is off.
Note: When not in use remove the portafilter. This will extend the life of the seal
inside the brew head.
12. Auto Shut OFF
The Auto Shut OFF function will turn off the unit automatically if there is no
operation within 25 minutes.
13. Cleaning & Maintenance
• Always disconnect the plug from the wall outlet and allow the appliance to cool
down before cleaning.
• Do not immerse the appliance in water or any other liquid.
• Do not use harsh abrasives to clean. Wipe down the appliance housing with
a damp cloth
• Wipe the brew head with a damp cloth.
Caution: HOT! Danger of burning or scalding!
• Rinse the fresh water tank, the support grid and tray regularly with water.
• Empty the drip tray regularly or when drip tray float level indicator pops up from
drip tray.
• If the inner screen inside the brew head accumulates coffee oils, it can be
unscrewed for thorough cleaning.
Note: When removing the water tank, small water droplets might accumulate on
the receptacle for the valve. Wipe off the water droplets to avoid water running
down in the back of the machine.
• Cleaning the Steam Wand and Frothing Sleeve see chapter 10.
14. Decalcifying
When making espresso, always use cold clean water. Using spring water or
filtered water will slow down calcium build up. The red indicator and white
indicator will blink alternately when the coffee machine has performed enough
coffee brewing or milk frothing cycles, which means that the coffee machine
needs to be decalcified. When using commercial decalcifying agents it is
important to follow their instructions. You can also use Capresso Cleaning
Solution, available at www.capresso.com. Dissolve 1 packet of Capresso
Cleaning Solution with 40 oz. of water and add to the water tank.
Note: Do not use vinegar as this will considerably shorten the life of the seal
inside the brew head.
a. Add decalcifying agent or Capresso Cleaning Solution mixed with water into
the water tank. Ensure the portafilter is attached and place a bowl beneath the
portafilter.
b. Wait 2 minutes to allow the machine to heat up, then turn the selector dial to
the left cup symbol, the Cleaning Solution will be pumped through the brew
head with the portafilter attached for approximately 60 seconds and then stop.
Turn the selector dial to the middle and leave the Cleaning Solution in the
appliance for approximately 5 minutes.
c. Place a large cup under the steam wand and turn the selector dial to the right
steam symbol. The steam wand will begin to dispense hot water into the cup
and will stop after approximately 60 seconds. Turn the selector dial to the
middle position.
