Caple ZRC900 Instruction Manual Download Page 11

Instruction manual ZRC900

11

Please keep this instruction manual for future reference

Description of symbols

Using the dial control

- Push the rotary dial, the LED lights will illuminate
-  Turning the rotary switch clockwise or counter-clockwise, stop the indicating light at the setting you want to select. The 

hood will select that setting after the indicating light illuminates twice.

- Push the rotary switch again at any setting to switch the hood off.
-  When the indicator light stops at the ‘timer’ setting, the hood will be functioning at speed III and then automatically switch 

off after 3 min.

CARE AND MAINTENANCE

Important

Before cleaning or maintenance please switch off the electricity supply and remove the plug from the wall.

Regular cleaning

-  Use a soft damp cloth with lukewarm mildly soapy water or household cleaning detergent. Never use metal pads, 

chemicals, abrasive material, abrasive cleaning creams or stiff brushes to clean the appliance.

Cleaning the grease filter

-  Clean the filter every month to help minimise the risk of fire.

-  The filter collects grease, smoke and dust, therefore the filter is directly affecting the efficiency of the cooker hood. If not 

cleaned, the grease residue (which is potentially flammable) will saturate the filter. It can be easily cleaned with warm water 
and washing up liquid, alternatively the filters can be cleaned in your dishwasher. Please ensure no other items are washed 
with the filters, they must be washed separately to prevent food becoming trapped in the gauze. Cleaning the grease filters 
in the dishwasher may lead to discolouration, this is normal and is a not a fault with the product.

Replacing your charcoal filter

-  This only applies if you are using the hood in recirculation mode (not vented to the outside). The charcoal filter traps your 

cooking odours and they need to be replaced, this can vary depending on how frequently the cooker hood is used. We 
recommend replacing them at least every 6 months.

-  This extractor uses CAP24CF charcoal filter. Filters can be purchased directly from www.caple.co.uk.

speed I

speed II

speed III

speed I + light

light

speed II + light

speed III + light

3 min. delay-off at speed III

Summary of Contents for ZRC900

















Reviews: