background image

 

 

Care and maintenance 

 

Cleaning your wine cabinet 

 

 

Turn off the power, unplug the appliance, and remove all items including shelves and rack. 

 

Wash the inside surfaces with a warm water and baking soda solution. The solution should be 
about 2 tablespoons of baking soda to 2 pints of water. 

 

Wash the shelves with a mild detergent solution. 

 

Wring excess water out of the sponge or cloth when cleaning area of the controls, or any 
electrical parts. 

 

Wash the outside cabinet with warm water and mild liquid detergent.  Rinse well and wipe dry 
with a clean soft cloth. 

 

Power failure 

 

 

Most power failures are corrected within a few hours and should not affect the temperature of 
your appliance if you minimise the number of times the door is opened. If the power is going to be 
off for a longer period of time, you need to take the proper steps to protect your contents. 

 

Vacation time 

 

 

Short vacations: Leave the wine cabinet operating during vacations of less than three weeks. 

 

Long vacations: If the appliance will not be used for several months, remove all items and turn off 
the appliance.    Clean and dry the interior thoroughly. To prevent odour and mould growth, leave 
the door open slightly (blocking it open if necessary). 

 

Moving your wine cabinet 

 

 

Remove all items. 

 

Securely tape down all loose items (shelves) inside your appliance. 

 

Wind the adjustable legs up to the base to avoid damage. 

 

Tape the door shut. 

 

Be sure the appliance stays secure in the upright position during transportation.  Also protect 
outside of appliance with a blanket, or similar item. 

 

 

Energy saving tips 
 

 

The wine cabinet should be located in the coolest area of the room, away from heat producing 
appliances, and out of the direct sunlight. 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for WF1104













Reviews: