Instruction manual WDU125
9
Please keep this instruction manual for future reference
I M P O R TA N T N OT I C E :
C U S H I O N M O U N T D E TA I L
When the cushion mount is installed correctly,
the lip of the sink flange fits into the groove on
the inside of the cushion mount and mount ring
can be pulled downward over cushion mount
and will be free to rotate. The bottom bead of
the cushion mount acts as a gasket between
the bottom of the sink flange and the top of the
disposer. See illustration 3G.
GROOVE
BOTTOM
“LIP” OF
SINK
FLANGE
MOUNT RING
SUPPORT
RING
SINK
BOTTOM
BEAD
CUSHION
MOUNT
3G
E L E C T R I C A L C O N N E C T I O N S
WARNING:
This appliance must be earthed. In the event of a malfunction, Earthing provides
a path of least Resistance for the electrical current, Thus reducing the risk of electrical Shock.
The rating for this disposer is 220/240V~, 50/60 Hz and should be connected to a main
distribution board or consumer unit.
Prior to connecting the electrical supply, the installer must be thoroughly familiar with electrical
power and procedures. If the installer is not, an electrician should
be contacted.
