GB
13
N
Options enabled LED's
These LED's light up when the relative option button is
pressed and indicate that the option has been selected. They
remain on until the machine switches off or a different
selection is made.
O
“Start/Pause” button
Press this button to start the selected washing programme.
During washing, press the “Start/Pause” button for about 3
seconds to pause the washing cycle. During the pause, the
“Time remaining” Led flashes and STOP appears on the
display. To resume the washing cycle from where it left off,
simply press the “Start/Pause” button again.
P
Start-Pause button LED
This LED lights up when the washing cycle starts (Start-
Pause button pressed) and remains on until the end of the
programme.
Q Select delayed start
button*
Press this button repeatedly to select after how many hours
you want the selected washing/drying programme to start.
The default value is 0 hours 0 minutes and each time the
button is pressed it increases by 30’ up to 12h and by 60’ for
the following 12 hours, up to 24 hours.
R
Select delayed start button
LED*
The LED lights up while the delayed start time is being
selected and remains on until the programme starts.
S
Delayed start time
shown on
display LED*
This LED indicates that the display is showing the selected
delayed start time.
*
Only for models featuring the delayed start option
4.2 DETERGENT TRAY
This is located to the left of the control panel. Pull it out to
open.
The tray comprises four compartments which are marked as
follows
“
1”
: pre-wash detergent
“2”
: main wash detergent
“
” or
“3”
: fabric softener, starch, etc. (treatment products).
Compartment
“4”
is used for bleach. If there is a cover marked
, this means that bleach cannot be used with this model of
machine. If bleach can be used with the machine, there is no
cover.
