12
13
Instruction manual WC6411 & WC6401
Instruction manual WC6411 & WC6401
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
I N T E R N A L L I G H T
In order to reduce energy consumption, the LED light within this wine cabinet will automatically
switch off after 10 minutes. If you would prefer the LED light to remain on continuously, this is
possible. Please press and hold the
4
4
key for 5 seconds, the display will show “LP”. After
4 seconds the display will revert back to normal and the light will remain on until manually
switched off.
If you would like to revert back and conserve energy (recommended), press and hold the
4
4
key for 5 seconds, the display will show “LF”. After 4 seconds the display will revert back to
normal, and the light will automatically switch off when the door is closed.
With humidity tank
Without humidity tank
U S I N G T H E S H E LV E S
To prevent damaging the door gasket, make sure to have the door fully opened when pulling
shelves out of the rail compartment.
For easy access to the storage content, you must pull the shelves approximately 1/3 out of
the rail compartment, however this unit was designed with a notch on each sides of the shelf
tracks to prevent bottles from falling.
When removing any of these shelves out of the rail compartment, tilt the shelf as per the
diagram and simply pull out, or push in the shelf until it sits on the support brackets securely.
CAUTION
Do not store bottles crossways on the interior floor. Otherwise, bottles may fall out when the
appliance door is opened and this may cause injury or material damage.
C AU T I O N
Do not store bottles crossways on the interior floor. Otherwise, bottles may fall out when the
appliance door is opened and this may cause injury or material damage.
6
Storage diagram
Shelves
•
To prevent damaging the door gasket, make sure to have the door fully opened when pulling
sh elves out of the rail compartment.
•
For easy access to the storage content, you must pull the shelves approximately 1/3 out of
the rail compartment, however this unit was designed with a notch on each sides of the
shelf tracks to prevent bottles from falling.
•
When removing any of these shelves out of the rail compartment, tilt the shelf as per the
diagram and simply pull out, or push in the shelf until it sits on the support brackets
securely.
COUTION
！
Do not store bottles crossways on the interior floor!
Otherwise, bottles may fall out when the appliance
door is opened and this may cause injury or material
damage.
Scan the QR code
below to access the
‘How to video’
