Caple WC177, Technical Information

Page: 24 / 32

Fig.18
Fig.19 Fig.20
6.2
Gist on disassembly outside the cabinet.
6.2.1 ． How to remove the Cover of PCB
Remove two screws fixing Cover of PCB, push the Cover of PCB forward and pull down it, then
pull it out. Disconnect all connectors from the Main PCB, remove the grounding and clamp screws,
remove the Cover of PCB. (Fig.21 & Fig.22)
Fig.21 Fig.22
6.2.2 ． How to remove the Main PCB
The process of removing the Main PCB: Remove the Cover of PCB (6.2.1)
→
Disconnect the
connectors
→
Remove the Main PCB
After removing the Cover of PCB, disconnect all connectors, press the head of the nails
one by one and pull the PCB at the same time, remove the PCB.
(Fig.23 & Fig.24)
Air-duct board
C or E
Dual temperature installation
Display PCB wiring
Hooks
Display PCB
fixing part
Dual temperature installation
Display
PCB
Cover of PCB
Screws
Main PCB