J130
3
counterclockwise direction and remove the filter
from its seat (Fig. 2).
To install the new filter proceed as described above
in the reverse order.
Clean frequently au the deposits on the fan and
other surfaces, utilizing a cloth moistened by
methylated spirits or neutral and not abrasive fluid
detersive.
REPLACING HALOGEN LAMPS
- Unplug the appliance from the electrical power
supply;
- Unscrew the chrome-plated diffuser ring and
remove them;
- Replace the faulty lamps, using only 20 W (max)
halogen lamps;
- Remount the chrome-plated diffuser rings.
REPLACING INCANDESCENT LAMPS
40W (E14) max
- Disconnect the hood from the electricity
- Remove the grate
- Replace the damaged lamp with one of the
same power.
WARNING! UNDER CERTAIN CIRCUMSTANCES
DOMESTIC APPLIANCES MAY BE DANGEROUS.
- Do not check filters with hood running.
- Do not obstruct vented outlets.
- Do not touch light bulbs or lamp-cover after long
periods of use.
- Not to be used over eye-level grill.
- No food must be cooked flambè underneath the
hood.
- The use of an unprotected flame is dangerous
for the filters and could cause fires.
- When frying foods, never leave the pan alone,
because the cooking oil could flare up.
- Before performing any maintenance operation,
disconnect the hood from the mains.
- The manufactures refuse to accept any
responsability for eventual damages to the hood,
because of failure to observe the above
instructions.
MAINTENANCE
The effective functioning of the hood depends on
the regularity with which the maintenance
operations are carried out, particulary in the case
of the synthetic-fibre and activated charcoal filters.
Grease filter
It has the function of catching the fat and solid
particles suspended in the air. It is thus subject to
clogging at various intervals, according to use and
the type of cooking.
In any case it is necessary to clean the filter at
least every two months, or replace it.
The grease filter is available in four versions:
acrylic, paper, metal and stretched aluminium.
The acrylic filter
should be washed by hand in
warm water using a neutral liquid detergent.
Let soak and allow the grease and impurities to
escape. Let dry without twisting.
The paper filter
cannot be washed and must be
replaced when the red lines appear on the bottom
part of the filter. The lines are visible through the
holes in the grill.
The metal filter
lasts almost indefinitely. The
cleaning procedure is the same as that for the
acrylic filter. Let dry before reinstalling.
Stretched aluminium filters
they are to be
washed by hand or by dishwashev once a month
and leaving them to dry before fitting.
Failure to correctly follow these cleaning
procedures will result in the risk of fire.
Charcoal filter
The charcoal filter, present only in the filtering
version, has the function of trapping odors and
purifying the air.
The saturation of the charcoal filter occurs after
more or less prolonged utilization, depending on
the type of cooking and on the regularity of
cleaning of the grease filter. In any case it is
necessary to replace the cartridge at least every
four months.
TO REMOVE THE CHARCOAL FILTER,
PROCEED AS FOLLOWS:
- Remove the frame
- Turn the center knob on the charcoal filter in the
All manuals and user guides at all-guides.com
