Instruction manual SO110SS
Instruction manual SO110SS
14
15
Instruction manual SO110SS
Instruction manual SO110SS
14
15
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
See below for full dimensional drawings of your steam oven to help with installation.
For a built-in steam oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature
of 120ºC. Plastic materials or adhesive which cannot withstand this temperature may become
deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
E L E C T R I C A L C O N N E C T I O N
W A R N I N G : T H I S A P P L I A N C E M U S T B E E A RT H E D
Check that the power rating of the mains supply is suitable for the maximum power of the
appliance as indicated on the rating label.
The fuse rating for this appliance is 16amp.
The appliance is supplied with a mains lead it should be “Hard wired” as follows:
»
The “yellow/green” earth wire, which must be connected to a terminal, and has to be about
10mm longer than the other wire.
»
The neutral wire has to be connected to the terminal marked with a letter N.
»
The Live wire should only be connected to the terminal marked L.
Mains connection can also be made by fitting a double pole switch with a minimum gap between
the contacts of 3mm, proportionate to the load and complying with the regulations in force.
T H E Y E L L O W / G R E E N E A RT H W I R E S H O U L D N OT B E C O N T R O L L E D B Y
T H E S W I T C H .
When a double pole switch is used for mains supply connection it should be easily accessed, once
the appliance is in position.
I M P O RTA N T:
The mains supply cable should be positioned so that it is never subjected to temperatures which
are more than 50ºC above ambient temperature.
The electrical safety of the appliance can only be guaranteed when it has been correctly
connected to a properly earthed mains electrical supply, as laid down in the current regulations for
electrical safety.
The manufacturer cannot be held responsible for any damage to persons or objects due to lack of
an earth connection.
The ovens are designed to operate with a mono-phase alternating current of 220-240V, 50Hz.
B E F O R E T H E I N S TA L L AT I O N O F T H E A P P L I A N C E , C H E C K T H E
S P E C I F I C AT I O N S O N T H E R AT I N G L A B E L .
D I M E N S I O N S
