background image

Instruction manual FSCHSS9

13

Please keep this instruction manual for future reference 

A I R   E X T R A C T I O N   S E T T I N G

D U C T E D   I N S TA L L AT I O N : 

Turn the adjuster to the ducted position, install the outlet, turn on the cooker hood. The air will be 
extracted to the outside outlet.

R E C I R C U L AT I O N : 

The recirculation mode uses a CAP80CF charcoal filter. Turn the adjuster to the indoor position, 
install the outlet cover onto the round ducting spigot, turn on the cooker hood, then the air can be 
vented from the front outlet.

N O T E :

We recommend the ducting does not exceed 2.5 metres in length, to ensure maximum efficiency.





























            





The  recirculation  mode  uses  a  C

CA

APP6622C

CFF  

charcoal

 

Note: The charcoal filter is mounted on the back of the grill and must 

be changed once every 6 months. Replacement CAP62CF charcoal 

filters can be purchased directly from www.caple.co.uk.

Warning: the charcoal filter cannot be washed or recycled. It should 

be changed at most after 120 hours of use. The charcoal filter 

shouldn’t be exposed to heat. 

To install the filters, simply line up the lugs and push onto the 

motor. Then twist to lock and secure to the filters.

Summary of Contents for FSCHSS9





















Reviews: