background image

Instruction manual DI632

14

Please keep this instruction manual for future reference 

L O A D I N G  T H E   S A LT   I N T O  T H E   S O F T E N E R

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower basket and should be filled as explained in  
the following:

W A R N I N G :

 

›  Only use salt specifically designed for the use in dishwasher. Every other type  

of salt not specifically designed for the use in a dishwasher, especially table salt, will damage 
the water softener. In case of damages caused by the use of unsuitable salt the manufacturer 
does not give any warranty nor is liable for any damages caused. 

 

›  Only fill with salt just before running a cycle. This will prevent any grains of salt or salty water, 

which may have been spilled, remaining on the bottom of the machine for any period of time, 
which may cause corrosion.

Contact your local water board for information on the hardness of your water supply.

N O T E :

The hardness of the water varies from place to place. If hard water is used in the dishwasher, 
deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses a salt container specifically 
designed to eliminate lime and minerals from the water.

Summary of Contents for DI632

















































Reviews: