background image

18

After every wash, turn off the water supply to the

appliance and leave the door slightly ajar so that

moisture and odours are not trapped inside.

Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.

To clean the exterior and rubber parts of the dishwasher,

do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.

To remove spots or stains from the surface of the

interior, use a cloth dampened with water and a little

vinegar, or a cleaning product made specifically for

dishwashers.

When you go on holiday, it is recommend that you run a

wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and

leave the door of the appliance slightly ajar. This will help
the seals to last longer and prevent odours from forming

within the appliance.

If the appliance must be moved, try to keep it in the vertical

position. If absolutely necessary, it can be positioned on
its back.

One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.

Periodic cleaning with a damp sponge will prevent this
from occurring.

To clean the edge around the door, you should use only a soft warm, damp cloth.

To avoid penetration of water into the door lock and electrical components, do not

use a spray cleaner of any kind.

Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components.

Abrasive agents or some paper towels should not be used because of the risk of scratching or leaving spots

on the stainless steel surface.

Ensure the voltage and frequency of the power being corresponds to

those on the rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not

appropriate for the plug , replace the socket, rather than using a adaptors or the like as

they could cause overheating and burns.

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving

only this appliance.

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of

electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a

cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an

appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

WARNING!

For personal safety:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING

CONNECTION FROM THE POWER CORD.

Summary of Contents for DF625


























Reviews: