Instruction manual CSB606 CSB706 CSB906 CSB1006
Please keep this instruction manual for future reference
8
INSTALLATION
CAUTION
- 2 people are required to unpack and handle the product, it is recommended that
gloves are worn.
- Carefully remove all packaging materials including the foam base, dispose of
correctly.
- Ensure that the surface of the wall is flat, free of dust and dirt.
- Carefully measure the wall and mark out the correct position for the splashback.
- Glue the support bracket of the splashback.
- Drill the holes on the wall according to the diagrams below.
WARNING
- Before drilling holes check the wall is clear of any cables, pipes etc.
- Use the screws (4x30mm) and wall plugs provided to fix the splashback (refer to
the previous page to ensure suitable).
- Tighten the screws and press the splashback to the wall.
- Any gap between the worktop and the wall must be sealed to exclude moisture
Installation
Caution:
2 people are required to unpack
and handle the product, it is recommended that
gloves are worn.
Carefully remove all packaging materials
including the foam base, dispose of correctly.
1.
Ensure that the surface of the wall is flat, free
of dust and dirt.
2.
Carefully measure the wall and mark out the
correct position for the splashback.
3.
Glue the support bracket of the splashback.
4.
Drill the holes on the wall according to the
diagrams on right.
WARNING!
Before drilling holes check the wall
is clear of any cables, pipes etc.
5.
Use the screws (4x30mm) and wall plugs
provided to fix the splashback (refer to the
previous page to ensure suitable).
6.
Tighten the screws and press the splashback
to the wall.
7.
Any gap between the worktop and the wall
must be sealed to exclude moisture.
4
Installation
Caution:
2 people are required to unpack
and handle the product, it is recommended that
gloves are worn.
Carefully remove all packaging materials
including the foam base, dispose of correctly.
1.
Ensure that the surface of the wall is flat, free
of dust and dirt.
2.
Carefully measure the wall and mark out the
correct position for the splashback.
3.
Glue the support bracket of the splashback.
4.
Drill the holes on the wall according to the
diagrams on right.
WARNING!
Before drilling holes check the wall
is clear of any cables, pipes etc.
5.
Use the screws (4x30mm) and wall plugs
provided to fix the splashback (refer to the
previous page to ensure suitable).
6.
Tighten the screws and press the splashback
to the wall.
7.
Any gap between the worktop and the wall
must be sealed to exclude moisture.
4
CSB Splashback Instruction Manual.indd 8
31/05/2016 16:13