41
Assembly and dismantling
of the side runner frames
– Fit the side runner frames into the
holes on the side walls inside the oven
(fig. 8.8).
– Slide into the guides, the shelf and the
tray (fig. 8.9).
– The rack must be fitted so that the
safety notch, which stops it sliding out,
faces the inside of the oven; the guard
rail shall be at the back.
– To dismantle, operate in reverse order.
Fig. 8.8
Inside of ovens
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with the
manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
•
NOTE
: The manufacturers of this
appliance will accept no responsibility
for damage caused by chemical or
abrasive cleaning.
Attention: Do not store flammable
material in the ovens.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
Fig. 8.9