11
Instruction manual CE920WH
Please keep this instruction manual for future reference
I N S TA L L AT I O N
Take the product out of the packaging and place it on a suitable surface: We suggest a soft
material, such as a sponge or a cloth.
Open the glass panel, as shown in Fig.1, and remove the grease filters.
NOTE:
In order to avoid any possible damage to the
glass panel, we recommend to remove this
before installation by unscrewing the eight
screws as shown in Fig.2.
› Create a recess with a rectangular
opening of 865x515mm. The depth can
range from 200-280mm.
› Install the hood onto the ceiling.
› Install the ducting system for the air outlet to connect to the motor.
› Make the electrical connection and then complete the plaster board structure.
› The recess shall be provided with a socket and a round pipe of 150mm diameter, or a
similar section, for the air outlet. Drill the holes on the ceiling as shown in Fig.6.
› Insert the plastic plugs into the holes made, and then fix the ceiling brackets as shown in
Fig.3. The ceiling brackets are telescopic, so their height can be adjusted at 80mm between
the ceiling and the hood.
INSTALLATION
Take the product out of the packaging and place it on a suitable surface: We suggest a
soft material, such as a sponge or a cloth.
Open the glass panel, as shown in Fig.1, and remove the grease filters.
NOTE:
In order to avoid any possible damage to the glass
panel, we recommend to remove this before
installation by unscrewing the eight screws as
shown in Fig.2.
> Create a recess with a rectangular opening of
865x515mm. The depth can range from
200-280mm.
> Install the hood onto the ceiling.
> Install the ducting system for the air outlet to connect to the motor.
> Make the electrical connection and then complete the plaster board structure.
> The recess shall be provided with a socket and a round pipe of 150mm diameter, or a similar
section, for the air outlet. Drill the holes on the ceiling as shown in Fig.6.
> Insert the plastic plugs into the holes made, and then fix the ceiling brackets as shown in
Fig.3. The ceiling brackets are telescopic, so their height can be adjusted at 80mm between the
ceiling and the hood.
Fig.2.
Fig.6.
Fig.3.
FIG.2
FIG.6
FIG.3
