Caple C850I Instruction Manual Download Page 8

 

8

Using the Timer                                                                         

You can use the timer in two different ways:

 

• You can use it as a minute minder. In this case, the timer will not turn any 

cooking zone off when the set time is up. 

• You can set it to turn one cooking zone off after the set time is up. 
• You can set the timer up to 99 minutes. 
 
 

Using the Timer as a Minute Minder 

 

1.

 

Note: you can use the minute minder even if you’re not selecting any cooking 
zone. 

 

2.    Touch”+” the controls of the timer. The minder     

  indicator will start flashing and “10” will show   

in the timer display.

 

 

 
 
 
 

3. Set the time by touching the “-“ or ”+” control   

of the timer 

 

Hint: Touch the “-“ or ”+”    control of the timer   

once to decrease or increase by 1 minute. 

 

Touch and hold th

-“ or “+” control of the   

timer to decrease or increase by 10 minutes. 

 
 
4. Touching the “-“ and ”+” together, the timer   

is cancelled, and the”00” will show in the minute   
display.

 

Make sure the hob is turned on.  

If you are not selecting any cooking zone 

Summary of Contents for C850I






















Reviews: